iFi iDSD nano

189,00

iFi iDSD nano. Portable headphones amplfier and DAC. It is full of ‘firsts.’ It is the world’s smallest, portable (only 163g), battery-powered, serious DAC that plays ALL high-resolution formats: PCM/DSD/DXD natively.

Pago sin comisiones / Financiación

FINANCIACIÓN INMEDIATA con tu Línea CETELEM
*Opciones de financiación al finalizar la compra

 

iFi iDSD nano portable form belies its bleeding-edge technological design. With the latest breakthrough True Native® technology from AMR, the music format remains unchanged throughout. PCM (32bit/384kHz), DSD (6.2MHz) and DXD (384kHz) via Computer or iPhone/iPad/Android simply sounds stunning; opening up a whole new world of high-end audio quality to a whole new generation of users.

 

In a palm-sized chassis with an onboard lithium-polymer battery and headphone output, the iDSD is as extraordinary ‘on the go’ as it is in a ‘high-end system’. It handles Computers/Smartphones with aplomb. It even features an SPDIF coax digital output for A/V receivers or similar to offer unrivalled flexibility.

 

The iFi iDSD nano. Small in size. Tremendous in technology.

 

Burr-Brown DAC chip
At iFi, they care little for ‘which format is best.’ Rather, they are obsessed with replaying each format at their optimum.

What does this mean? Selection of the most advanced chipset and exemplary implementation.

The Burr-Brown DAC chip used was developed by BB Japan and BB themselves (as opposed to BB/TI). Though the product introduction was post-merger, this chipset represents Burr-Brown’s “swan song” for the best of their converter technology and remains to this day, held in high-regard.

Having a chipset able to play all formats would count for little if this was not all executed natively; without conversion from one format to another. Using trickle-down technology from AMR (who drafted the chipset code) to drive this Burr-Brown chipset, the original music format remains unchanged which is essential to attaining the zenith in high-end audio reproduction.

 

PCM / DSD / DXD
Computer-audio playback is advancing at breakneck speed. The iDSD is at the cutting-edge.

The focus on portable devices has positioned the iFi iDSD nano at the forefront of this latest audio shift. Not only on computers, but the iFi iDSD nano coupled with an iPhone/iPad/Android device, becomes a high-end audio source; able to play all formats, stunningly well:

• PCM from 16/44kHz all the way up to 32/384kHz.
• DSD all the way up to 6.2MHz.
• DXD up to 384kHz.

Such a multi-talented DAC is seldom seen at any price which just goes to show the iFi iDSD nano is state-of-the art, despite its affordable price.

The latest advancements in Smart Devices such as iPhone/iPad/Android has transformed them from a mobile phone to a portable, high-end Computer Audio Source*. These Smart Devices are able to natively encode and transmit high-res PCM/DSD/DXD audio. As the iFi iDSD nano is able to natively decode the same, this high-end ‘Transport+DAC’ combination offers astounding sonics yet is all just palm-sized and able to be enjoyed on the move as well as at home.

 

10 hours battery life
The iFi iDSD nano features an onboard lithium-polymer battery. This offers two distinct advantages. First, sonically-speaking, the iDSD is able to run on battery power for excellent sonics over generic noisy mains. Second, the iDSD via its powerful 80mW headphone amplifier offers high-end, portable audio enjoyment.

However, for ultimate sonics at home, it is also possible to run off the iUSB Power (via USB port) just by powering on the iDSD prior to connection to the PC.

The iFi iDSD nano offers the best of battery and iFi USB power.

 

Clock Crystals
There are clock crystals and there are the clock crystals in the iDSD. The ‘clocks’ used in the iDSD which have been supplied by AMR, are military-grade temperature compensated master clock modules which avoid the creation of unwanted beat frequencies. Such crystals reduce overall digital noise and push jitter to the vanishing point. These clocks have been specifically-sourced from the telecommunications industry where standards are far more exacting than those in the industrial sector (which normally supplies to the audio industry).

Expect the iFi iDSD nano to sonically compete with far more expensive DACs. Its smooth, ‘analogue’ sound is in large part, due to the overall quality of its components such as its special clocks.

Just like other products in the range, the iFi iDSD nano benefits from AMR trickle-down technology. To lock-out jitter,the iDSD does not settle for Asynchronous USB transfer alone. To truly cancel jitter, it also employs AMR’s Zero Jitter® Lite technology from the famous AMR DP-777 which has Asynchronous as the starting, not finishing point.

Rest assured, the iDSD (and all other iFi usb products for that matter) don’t do generic implementation. This is why they are all so sonically satisfying.

 

Analogue Volume Control
The iFi iDSD nano very visibly features a built-in precision analogue volume control which is more than a match for anything found at twice, even thrice its price point. Its smooth action reflects its smooth sound. It sure delivers the sonic goods.

This fastidious attention to detail and consideration for the user is standard for iFi.

 

Digital Coax Output
The iFi iDSD nano is not only able to supply an analogue signal, but its digital coax output means it can feed any suitably-equipped coax-DAC such as an A/V Receiver, to play high-end computer audio.

This versatility is typical of iFi and offers tremendous longevity and flexibility.

 

Additional information

Weight 0,5 kg

Specifications

Power Source: Battery/USB Bus power. DAC/Amp always run on battery

Battery Life: ~ 10 Hours playback*

Formats: 44.1/48/88.2/96/176.4/192/384KHz PCM. 2.8/3.1/5.6/6.2MHz DSD. 353/384KHz DXD

Bit-Perfect DSD & DXD DAC by Burr Brown (1-DAC Chip; 2-Channel; 4-Signals)

Filter: PCM: Standard/Minimum Phase digital (selectable). DSD: Standard/Extended Range analogue (selectable). DXD: Bit-Perfect Processing, analogue filter (fixed)

Input: USB 2.0, compatible with iPhone,iPod, iPad and Android Devices USB-OTG#

Output SPDIF RCA (only PCM up to 192KHz). Audio RCA. 3.5mm Headphone

Dynamic Range: > 105dB(A)

THD &N (100mW/16R): < 0.02%

THD &N (Line): < 0.005% (0dBFS/50Hz)

Output Power (16R): > 130mW (THD +N < 1%)

Output Voltage: >1.65V (>100Ω Load)

Output Impedance:(Zout): <1Ω

Power Consumption: < 3W (charging battery and playback together)

Dimensions: 87(l)x68(w)x28(h)mm

Weight: 162g(0.43lbs)

 

* depends on sample rate and volume setting.
# requires Camera Connection Kit or OTG adapter. Cable sold separately.

Reviews

There are no reviews yet.

Be the first to review “iFi iDSD nano”

Your email address will not be published. Required fields are marked *