The direct-drive engine provides playback for both 33 1/3 & 45 RPM records, with a cast aluminium platter and thick damping mat housed together in a structure that has been engineered for minimum chassis resonance, while skillfully retaining the discreet look that complements today’s listening environments on the Audio Technica AT-LP5 direct-drive engine turntable.
The J-shaped tonearm, engineered to minimise tracking error, harks back to the original Audio-Technica designs of the 1960’s & 70’s, complementing the Audio Technica AT-LP5 turntable clean lines, and comes fitted with Audio-Technica’s lightweight Audio Technica AT-HS10 headshell and the exclusive Audio Technica AT95Ex Dual Moving Magnet cartridge.
The Audio Technica AT-LP5offers a built-in switchable phono/line pre-amplifier that provides connection to a stereo system equipped with either phono or line-level inputs. The AT-LP5 also includes Audacity recording software for MAC or PC, USB cable and an RCA / RCA stereo adapter cable, allowing direct connection to your computer to transfer your classic LP collection to digital files using its USB output.
Specifications
Turntable
Type: 2-Speed, fully manual operation
Motor: DC motor
Drive method: Direct drive
Speeds: 33-1/3 RPM, 45 RPM
Turntable platter: Die-cast aluminium
Starting torque: >1.6 kgf.cm
Braking system: Electronic brake
Wow and flutter: < 0.2% WRMS (33 RPM)
Signal-to-noise ratio: > 50 dB
Output Levels: “PHONO” (Pre-amp bypassed) – 4 mV nominal at 1 kHz, 5 cm/sec
“LINE” (Pre-amp engaged) – 150 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-amp gain: 36 dB nominal, RIAA equalized
USB function: A/D, D/A – 16 bit 44.1 kHz or 48 kHz USB selectable
Computer interface: USB 1.1 (or higher) compliant Windows XP, Vista or MAC OS X
Tonearm
Type: Static balance shaped tonearm
Effective Length: 247mm
Typical Overhang: 17mm
Maximum tracking error angle: Less than 2.5° curve
Stylus pressure adjustment range: 0 to 2.5 g
Applicable cartridge weight range (including headshell): 15 to 20 g
General
Power supply requirements: 230V AC, 50 Hz
Power consumption: 6W
Dimensions: 450.0 mm (17.72”) W x 352.0 mm (13.86”) D x 157.0 mm (6.1”) H
Weight: 10.5kg
Accessories included: AT95EX Dual Moving Magnet stereo cartridge with replaceable stylus; Exclusive AT-HS10 Lightweight Headshell; AC line cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; recording software
Cartridge and headshell
Cartridge Model: AT95EX
Cartridge Type: VM Design Stereo Dual Moving Magnet
Recommended load impedance: 47,000 ohms (when using external PHONO preamp)
Output voltage: 4 mV (at 1 kHz, 5 cm/sec)
Stylus Elliptical: 0,3 x 0,7 mil
Tracking force range: 1.5 to 2.5 g (standard 2 g)
Cartridge weight: (AT95Ex) 5.7 g
Headshell model: AT-HS10
Headshell weight: 10g
Headshell overhang adjustment: ± 5 mm
Software
General Specifications: PC or Mac with an available USB port (USB 1.1 or higher) Mac running OS X 10.4 or later or PC running Windows (Vista and above)
Installation: CD-R or CD-RW writer for burning CDs & software installation. Includes Audacity software for PC & Mac users
Reviews
There are no reviews yet.