FiiO X1II

119,00

FiiO X1 II (2nd generation). Portable music player MP3. The next king of low cost audio, withe Bluetooth and the best component for making the best of your music.

(0 customer reviews)

Pago sin comisiones / Financiación

FINANCIACIÓN INMEDIATA con tu Línea CETELEM
*Opciones de financiación al finalizar la compra

 

The brand new FiiO X1 II is a portable high resolution lossless music player with wireless music played at a touch of wheel. It features dual mode Bluetooth, in-line remote control, metallic housing, DAC chip and much more!

 

 

Comprehensive improvement of hand feel starting from the touch wheel
By studying and comparing dozens of designs and through hundreds of experiments and test, FiiO has finally developed the unique Fiio touch wheel with higher sensitivity, better anti-interference, enhanced reliability and longer service life.

 

Wireless Bluetooth 4.0 allowing you to enjoy music easily
The Bluetooth 4.0 system based on F1C81 chip set allows you to easily enjoy the music with reduced latency and high sound quality.

 

Getting rid of the wire to achieve two functions
Two-way transmission allows it to receive Bluetooth signal while sending Bluetooth signal (FiiO RM1 can be used at the same time when Bluetooth headphone or Bluetooth speaker is on.

 

Not limited by wire
Being not restricted during exercise, you may have good sweat while enjoying wireless music.

 

On-board music accompanying you on the way
In-the vehicle mode provides a perfect link between music and vehicle audio system, which has greatly improved the acoustic quality of vehicle audio system and let you enjoy music on the way.
When vehicle engine is ignited, FiiO X1 II is turned on too. When you shut down the engine X1 stops immediately. There are no tedious manual operations any more.
*To ensure better sound quality, AUX line connection is suggested for on-board mode.

 

Dedicated professional high quality DAC chip
Utilizing Texas instruments’ high quality CM5242, the all new FiiO X1 II gets higher signal to noise ratio and supports full differential line output to achieve balanced line output function, as compared with PCM5142 of the last generation.

 

Further optimized architecture
With dedicated LPF and operational amplifier we have optimized design of power architecture and circuit at the same time to further improve sound quality of the all new FiiO X1 II, making better low-frequency quality and depth.

 

Strong lossless format support
It supports the five common major lossless music formats: APE/FLAC/WAV/WMA/ALAC. At up to 192kHz/32bit

 

Improved line output functions
It supports both headphone output and line output, which can be used as audio source to you amplifier to increase your pleasure in the listening to music. Line output can be easily set in system settings.

 

New deep-sleep standby design
Deep-sleep standby enables instant-on playback. Stand by as long as 15 days allows music to be your companion at any moment.

 

In-Line remote control function
Improved in-line remote control function can effectively adapt to most headphones available on the market, in addition to a new function of volume adjustment
*Do not support volumen control of apple EarPods.

 

Light and portable
Full aluminum alloy and cineast design provides a better hand feel (97×55,5×12 mm)

 

Humanized design
Arc waist design is employed to provide better hand fitness and feel.

 

All-new UI themed interface
Continue to use 2.0 inch color display with a resolution of 320*240, plus characteristic UE operating system (with three built-in color themes availablee at your choice)

 

Music enjoyment for 30 thousand minutes
It supports micro SD card up to 256GB. When calculated by 30 MB for a piece of lossless music, it can accommodate approximately 8.738 pieces of music. If a piece of song last for four minutes, you may liste for 34.952 minutes, i.e.2.098 hours or 87 days.

 

Additional information

Weight 0,3 kg
Color

Black, Silver

Packaging and accessories

Packaging: Cardboard package box
Dimensions of package: 98mmx168mmx42mm
Cable: 1m high current micro USB data/chrging cable
Clear case: transparent
Screen protector: 2 included (1 applied in factory)
Warrant card: 1 copy
Quick start guide. 1 copy
Bodywork sticker: 2 sets
Hi res sticker: 3 pcs

Specification

Technical
Display screen: TFT320x240
Analog Audio Output jack (LO) 3,5mm headphone output jack
Digital Audio Output jack: N/A
USB DAc /N/A
Headphone out (PO): 3,5 mm headphone output jack
Headphone Impedance range: 16-100 Ohm
Volumen control Type: 100 steps digital potentiometer
Bass boost_ N/A
Treble: N/A
Blanca: 5db
Gain selection: N/A
Equalizer: 7 band equalizer (+/- 6db)
Dimensions: 97 x 55,5 x 12 (mm)
Weight: 102g

 

Partial performance parameters for line output
THD+N: ≤ 0.003% (1 kHz)
Frequency Response: 5 Hz~60 kHz (-3dB)
Crosstalk: ≥ 101 dB (10 KΩ/1 kHz)
SNR: ≥115 dB (A-weighted)
Dynamic range: ≥107 dB

 

Partial Performance Parameters for Headphone Output
Output Power 1: ≥ 90mW (16 Ω/THD+N<1%)
Output Impedance: <1Ω(32Ω loaded)
Output Power 2: ≥ 70 mW (32 Ω/THD+N<1%)
Crosstalk: ≥72 dB (1 kHz)
Output Power 3: ≥ 8 mW (300 Ω/THD+N<1%)
THD+N: ≤ 0.003% (1 kHz)
Frequency Response: 5 Hz~60 kHz (-3dB)
MAX output voltage: >4.0 Vp-p
SNR: ≥113 dB (A-weighted)
MAX output current: >130 mA (For reference)

 

Power and Battery
Power: Recommend DC5V 2A
Battery Capacity: 1800 mAh
Charge Display: Red light indicates , green light turns on after fully charged
Battery Display: Yes
Battery Life: >12 h
Charging Time: <3 h (DC5V 2A)

Audio Format supported

Lossless: APE(Fast): 192 kHz/24 bit, APE(Normal): 96 kHz/24 bit, APE (High): 96 kHz/24 bit, FLAC: 192 kHz/24 bit, WAV: 192 kHz/32 bit, iff:192 kHz/32 bit, Aif:192 kHz/24 bit, WMA Lossless: 48 kHz/24 bit (to be supported by future update), Apple Lossless: 192 kHz/24 bit

 

Lossy compression: MP3, AAC, WMA, OGG, etc.

Reviews

There are no reviews yet.

Show reviews in all languages (4)

Be the first to review “FiiO X1II”

Your email address will not be published. Required fields are marked *