iFi Nano iDSD Black Label


iFi Nano iDSD Black Label. Portable headphones amplifier and DAC. It’s small, lightweight and battery powered. You can take the iFi Nano iDSD Black Label headamp everywhere you go and it won’t drain your phone’s battery.

Pago sin comisiones / Financiación

*Opciones de financiación al finalizar la compra


Just switch on the iFi Nano iDSD Black Label portable headphones amp and DAC first and then plug in your device. The Lithium Polymer battery gives the iFi Nano iDSD Black Label amp and DAC 10 hours of non-stop musical enjoyment. 


It also has a special USB male ‘A’ connector for a direct connection. Use a USB-to-Lightning (Apple) or OTG connector (Android). Or if at home, just use the enclosed USB3.0 cable to connect to a PC.


Stream Apple Music / Google Play / Spotify / Tidal / Youtube content from your phone to a whole other level of quality. Add kick-a** sound to your gaming by connecting your console or computer.


Master Quality Authenticated MQA
iFi always strives to bring you choice. They’ve added yet another file format to our portfolio in the form of MQA in the new BL. Take TIDAL or your MQA file to a whole new level. MQA is an audio technology developed by Bob Stuart. This technology makes hi-res audio streaming a reality and delivers studio master quality audio to your headphones.


High-Res Audio Certified
The iFi Nano iDSD Black Label is one of the best native highest-resolution DACs you can find, supporting PCM up to 32/384 kHz and DSD up to 256 times the sample rate of a CD, even on Mac OSX* and mobile phones*. It is also certified ‘High-Res Audio’ according to the stringent criteria set down by JEITA and JAS (Japan Electronics and Information Technology Industries Association and Japan Audio Society). Don’t accept low-resolution music!(*firmware upgrade needs to be applied to enable DSD256 on all devices).


Perfect your listening pleasure
The iFi Nano iDSD Black Label lets you choose between the ‘Listen’ (Minimum Phase Bezier Filter) and ‘Measure’ (Linear Phase Transient Aligned Filter) options. It’s the only portable DAC to give you so much control.


Compatible. Like no other
The new headphone amplifier delivers more than double the power of the original iFi nano iDSD into 16 Ohm and over four times the power into high-impedance headphones. Meanwhile, the built-in IEMatch circuit ensures that even extremely sensitive headphones and IEMs are ‘hiss free’ throughout the volume range.The iFi Nano iDSD Black Label amp also includes the S-Balanced wiring system for the headphone outputs, giving the full benefit of balanced outputs when used with headphones and IEMs (fitted with balanced wiring) with low-noise and lower distortion. Even unbalanced headphones benefit, as S-Balanced cuts crosstalk in half (without the need to re-wire headphones to benefit).


And as always, iFi Audio uses the ultimate component
As is the AMR/iFi DNA, they love to audition and vet new parts as they come onto the market and where possible, use the ultimate components. Whereas some shun internals pictures, they always strive to show ‘what’s under the hood’ as customers like to make informed purchasing decisions based upon sonics and outright ‘sound for the pound’. The iFi Nano iDSD Black Label headphones amp and DAC, while very affordable, is packed to the rafters with boutique components. Here are just a few:


1. Thin Film Resistors for audio section lower noise & distortion than standard metal film or carbon film types.
2. Tantalum Polymer Capacitors for Power Supplies.
3. TDK C0G capacitors for the analogue filter.
4. Panasonic ECPU Film Capacitor for critical DAC reference voltage.
5. Analogue volume control potentiometer for best sound quality.
6. Dual-Mono Headphone amplifier with 3.5mm TRRS balanced wiring all the way to the amplifier, despite the amplifier being single-ended this delivers all the benefits of balanced wiring.
7. Built-in iEMatch using MELF resistors for transparent matching of very sensitive headphones and/or IEMs.


The parts, the circuitry, the implementation is something else and makes the iFi nano iDSD Black Label a worthy successor to the original nano iDSD. It just goes up against the best out there and kicks sand in their face.


The iFi nano iDSD one of the few portable, truly audiophile DACamps out there and the fact that it is priced appealing to the real-world means many are going to enjoy their music a whole lot more without being excluded by the price.


So, get your toes a tapping to the file format of your choice and give the new BL a whirl.


Max out Balanced headphones (and Single-Ended too)
Even more format choice. MQA authenticated
Hi-Res streaming like never before
Listen better Listen longer: 10-hour battery life


Check out the user manual.

Additional information

Weight 0,139 kg
Dimensions 96 × 64 × 25,5 cm



Input (rear): USB2.0 type A “OTG” Socket (with iPurifier® technology built-in)

Output (rear): 1 x Audio fixed line out L+R 3.5mmDigital Filter: 2 positions, 2 filters

Outputs (front): 2 x Headphone Audio 3.5mm one direct and one with iFi iEMatch® integrated


DACDSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processingClock: Low-jitter crystal clockAudio Formats: DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8, DXD 384/352.8kHz, PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz, MQA 88.2/96/176.4/192kHz filters

Filter: PCM Listen (transient optimised minimum phase), Measure(frequency response optmised). DSD: Listen(extended bandwidth transient optimised), Measure (narrow bandwidth, low output band noise optimised). DXD: Fixed Bit-Perfect Processing. MQA: Fixed MQA Filter


Headphone Amplifier

Amplifier: Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity

Volume Control: 3.5mm TRRS with Balanced compatible wiring

Dynamic Range (including DAC): > 109dB(A) @ 3v (Direct), > 107dB(A) @ 0.5V (iEMatch®)THD &N (@ 125mW/30R): < 0.005%

Max. Output (<10% THD): > 3.5V @ 600Ω Load (Direct) (20mW/600Ω), > 2.9V @ 30Ω Load (Direct), 285mW/30Ω > 1.7V @ 15Ω Load (Direct) (200mW/15Ω)Output Impedance: < = 1Ω (Direct) < = 4Ω (iEMatchsup>®)

Channel Separation: > 79dB @ 600Ω Load (Direct) > 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring)


Line Output

Dynamic Range(Line): > 109dB(A)THD & N(0dBFS Line): < 0.004%Output Voltage(Line): 2.15V (+/-0.05V)

Output Impedance: < 240ΩChannel Separation: > 99dB (@ 1kHz)

Jitter (correlated): Below test set limit



Dimensions: 96(l) x 64(w) x 25.5(h)mm

Weight: 139g (0.31 lbs)


There are no reviews yet.

Be the first to review “iFi Nano iDSD Black Label”

Your email address will not be published. Required fields are marked *